NT® nickel-based continuous-cast rods
| BRAND NT® | Weld metal standard analysis, % |
Hardness at RT | Applications and properties | Diameter as delivered ø mm | |
| NT® Alloy T-700 | C Si Cr Mo Fe |
0,04 2,9 15,0 32,0 0,5 |
47 HRC | NT® Alloy T-700, highly resistant to corrosion and oxidation; cobalt-free, intermetallic nickel-based alloy especially well suited for use as a substitute for Co-Cr-W alloys for applications in nuclear technology - not susceptible to activation by radiation. | 5,0 |
| NT® Alloy Ni 60 W | C Si Cr Fe B |
0,7 2,0 14,5 4,5 3,2 |
54 HRC | Self-flowing NiCrBSi hard alloys for the application of hard, high-temperature-resistant claddings by hard-surfacing techniques; low coefficient of friction and high adhesion resistance; constant hardness value up to 650 °C, but pronounced decrease in hardness above this temperature; smooth weld-bead surface with low penetration by virtue of the low melting point of the alloy; typical applications: hard facing of valves and fittings, extruder worm conveyors, stone-cutting tools, centrifuges, fan blades, shaping tools. | 4,0 5,0 6,0/6,4 |
| NT® Alloy Ni 60 H | C Si Cr Fe B |
0,75 2,0 14,5 4,0 3,8 |
58 HRC | ||
| NT® Alloy 50 | C Si Cr Fe B |
0,6 3,5 11,5 3,7 1,9 |
50 HRC | ||
Rod surface: continuous-cast, bare surface in the standard version; polished version available on request.
Further continuous-cast quality grades and lengths available on request.